If you stick to our system, i.e. use both our panels and our matching system accessories and follow our detailed installation instructions, you can save yourself the work! You read that correctly - our materials are of such high quality that you can save yourself both this work step and the additional material. This usually saves at least one working day.
If you still want to reinforce the surface after processing the calcium silicate boards, we recommend working with our lime filler. This is applied in an approx. 2-3 mm thick layer to the attached panel. Make sure that the panel is primed. Now carefully press the reinforcing mesh into this layer so that it is in the upper half of the layer. Straighten out any excess filler. Make sure that you use a very thin mesh. Apply enough filler to cover the entire surface of the reinforcing mesh with a thin layer and remove it. Allow the reinforcing filler to dry and then plaster your wall once again with the lime filler for a particularly smooth surface.