Combi economy pack smooth 100mm (calcium silicate boards 1,000x750x100mm, Primer, adhesive, filler & paint)
Exemplary presentation
Silicate primer | 5L
Calcium silicate board pre-primed (1,000x750x100mm)
Smoothing / lime filler | 20kg bag
Silicate paint PREMIUM white | 5L
Brush-on and roller plaster | 7kg
  • 100 mm
  • Standard
  • pre-primed
German brand products Icon
German branded products
German distribution with Europe-wide production and insured delivery by forwarding agent to many countries.
Improve the indoor climate Icon
Improve the indoor climate
Climate panels improve the room and living climate and are therefore also called room climate panels or living climate panels.
Natural mold inhibition Icon
Natural mold inhibition
Climate panels are natural alkaline building materials and have a permanent mold-inhibiting effect.
No reinforcement necessary
No reinforcement necessary
Due to the board format and the nature of our lime filler, it is no longer necessary to reinforce the board.
Ecological natural product Icon
Ecological natural product
Climate panels are biologically harmless products and do not use environmentally harmful materials
Free from harmful substances Icon
Free from harmful substances
Climate panels are free from asbestos, quartz, VOCs or fungicides
Permeable and capillary-active Icon
Permeable and capillary-active
Allows water vapor to pass through (diffusion-open) while simultaneously absorbing and transferring moisture through capillary forces (capillary-active)
Reduce energy costs Icon
Reduces energy costs
With interior insulation using climate panels, you can help reduce energy loss by up to 90%.
A1 Certified Icon
A1 Certified
Non-combustible and without any combustible building materials A1 - highest class!
Cost-effective & precise Icon
Cost-effective & accurate
The use of climate panels is a cost-effective and targeted interior fit-out instead of major construction work.
Exterior façade remains unchanged Icon
Exterior façade remains unchanged
The outer façade remains unchanged, as application only takes place in the interior. This also makes it possible to insulate listed buildings, for example.
Simple processing Icon
Simple processing
Quick and easy installation without special tools thanks to a coordinated system - even for non-professionals.
Can be applied to Icon gypsum plaster
Can be applied to gypsum plaster
With our special primer for gypsum plaster and in combination with our special adhesive, you can also process climate control panels on gypsum plaster, thus saving time and money.
ETA sign
ETA certified
Building authority approved for interior insulation with ETA certificate.
This product is categorized as: Combi economy packs Combi economy packs

Combi economy pack 100mm calcium silicate boards 1,000x750x100mm, Primer, adhesive, filler & paint or roller plaster

Artikelnummer: KP08.RPX4.100.0000-00
Category:

from 929,44 € incl. 19% VAT plus shipping costsSave up to 2%

Not in stock

In the combination economy pack with 100 mm calcium silicate boards (pre-primed at the factory), you will receive the following materials for the final finishing for a beautiful smooth surface in addition to the basic equipment for gluing the boards:

  • Pre-primed calcium silicate boards 1,000 x 750 x 100 mm
  • Silicate primer
  • Special KP silicate adhesive
  • Smoothing / lime putty
  • PREMIUM silicate paint or brush and roller plaster (both white - tinting possible)

This product is currently sold out and not available.

¹ regular total price plus shipping costs incl. 19% VAT if components are ordered separately
Pay securely with PayPal.
German brand products Icon
German branded products
German distribution with Europe-wide production and insured delivery by forwarding agent to many countries.
Improve the indoor climate Icon
Improve the indoor climate
Climate panels improve the room and living climate and are therefore also called room climate panels or living climate panels.
Natural mold inhibition Icon
Natural mold inhibition
Climate panels are natural alkaline building materials and have a permanent mold-inhibiting effect.
No reinforcement necessary
No reinforcement necessary
Due to the board format and the nature of our lime filler, it is no longer necessary to reinforce the board.
Ecological natural product Icon
Ecological natural product
Climate panels are biologically harmless products and do not use environmentally harmful materials
Free from harmful substances Icon
Free from harmful substances
Climate panels are free from asbestos, quartz, VOCs or fungicides
Permeable and capillary-active Icon
Permeable and capillary-active
Allows water vapor to pass through (diffusion-open) while simultaneously absorbing and transferring moisture through capillary forces (capillary-active)
Reduce energy costs Icon
Reduces energy costs
With interior insulation using climate panels, you can help reduce energy loss by up to 90%.
A1 Certified Icon
A1 Certified
Non-combustible and without any combustible building materials A1 - highest class!
Cost-effective & precise Icon
Cost-effective & accurate
The use of climate panels is a cost-effective and targeted interior fit-out instead of major construction work.
Exterior façade remains unchanged Icon
Exterior façade remains unchanged
The outer façade remains unchanged, as application only takes place in the interior. This also makes it possible to insulate listed buildings, for example.
Simple processing Icon
Simple processing
Quick and easy installation without special tools thanks to a coordinated system - even for non-professionals.
Can be applied to Icon gypsum plaster
Can be applied to gypsum plaster
With our special primer for gypsum plaster and in combination with our special adhesive, you can also process climate control panels on gypsum plaster, thus saving time and money.
ETA sign
ETA certified
Building authority approved for interior insulation with ETA certificate.
  • Delivery (3-6 working days)
  • Available for collection
Processing instructionsRequest for quotationProduct data sheet
Favorable prices
Proven quality at an affordable price!
Personal
consultation
We are here for you and will be happy to help you by e-mail and telephone.
Convenient delivery or collection in Essen
You can have your order conveniently delivered to your home or collect it in person from our warehouse in 45136 Essen.
Excellent
customer feedback
We give everything for you! Our ratings reflect this promise.
Installment and invoice payment
With Klarna you can pay conveniently on account or in installments.
100%
safe shopping
Your communication with our servers is protected by secure 256-bit SSL encryption!

Additional information

Weight -
Panel class

Standard
Panel format

750×1000 mm
Pre-primed

Yes
Calcium silicate boards Strength

classic
Panel thickness

100 mm

Product components

Calcium silicate board pre-primed (1,000x750x100mm) Special KP silicate adhesive | 25kg bag Smoothing / lime filler | 20kg bag Silicate paint PREMIUM white | 5L Silicate primer | 5L Brush-on and roller plaster | 7kg
Feature Calcium silicate board pre-primed (1,000x750x100mm) Special KP silicate adhesive | 25kg bag Smoothing / lime filler | 20kg bag Silicate paint PREMIUM white | 5L Silicate primer | 5L Brush-on and roller plaster | 7kg
Item number KP08.EP01.100.0000-75 ZB08.SK01.025.0025-00 ZB08.GS01.020.0020-00 ZB08.SF01.005.0005-00 ZB08.SG01.005.0005-00 ZB08.SR01.007.0007-00
Weight 16.9 kg 25 kg 20 kg 8.1 kg 5.3 kg 7 kg
Applicable substrates
  • Mineral substrates e.g. sand-lime bricks, bricks, lime plaster, concrete etc. ...
  • The substrate must be firm, clean, free of oil and grease, dry and stable.
  • Mineral substrates e.g. sand-lime bricks, bricks, lime plaster, concrete etc. ...
  • The plaster base must be firm, stable, frost-free and free of adhesion-reducing residues
  • If necessary, prime or pre-wet highly absorbent substrates
  • Can be applied to gypsum plaster
  • Mineral substrates e.g. sand-lime bricks, bricks, lime plaster, concrete etc. ...
  • Concrete
  • Plaster
  • Plasterboard
  • Calcium silicate boards
  • matt, load-bearing old coatings
  • mineral substrates
  • Plaster
  • Woodchip wallpaper
  • The substrate must be firm, clean, free of oil and grease, dry and stable.
  • The substrate must be firm, clean, free of oil and grease, dry and stable.
  • Calcium silicate boards
  • Mineral substrates e.g. sand-lime bricks, bricks, lime plaster, concrete etc. ...
Properties
  • open to vapor diffusion
  • The product does not contain or release any hazardous substances according to EOTA TR 034 (version October 2015).
  • moisture-regulating
  • Suitable for use in contact with austenitic steels (ASTM 795)
  • Good mechanical strength
  • High thermal resistance
  • capillary active
  • no mineral foam
  • no perlite
  • No carcinogenic mineral fibers
  • Low thermal conductivity
  • ecologically harmless
  • Quality exceeds the requirements of ASTM and DIN EN standards
  • purely mineral
  • Mold-inhibiting (alkaline)
  • Sulphur-free and low in iron
  • Very easy to process
  • Increasing the feel-good factor
  • 0% VOC - no outgassing
  • Also suitable for levelling / equalizing walls
  • extremely economical
  • open to vapor diffusion
  • high adhesion
  • High adhesive strength
  • capillary active
  • ecological
  • optimized for calcium silicate
  • Can also be applied to gypsum plaster in conjunction with special gypsum plaster primer
  • 0% VOC - no outgassing
  • Breathable
  • extremely economical
  • biologically harmless
  • Low chromate
  • for extremely smooth surfaces
  • Basis for subsequent coats of paint
  • Highly permeable
  • Hydraulically hardening - butter-soft processing
  • No reinforcement necessary
  • ecologically harmless
  • Fungus and mold inhibiting
  • extremely economical
  • Free from fogging-active substances
  • free from preservatives
  • Suitable for allergy sufferers
  • Low odor
  • Good adhesion due to silicification with mineral substrates
  • Highly permeable
  • High degree of whiteness
  • Category A/a 30 g/l (2010)
  • Natural alkalinity
  • Produkt enthält < 1 g/l VOC
  • harmless to indoor air hygiene
  • Very good coverage
  • Prevents the growth of bacteria and fungi
  • water-dilutable
  • Breathable
  • extremely economical
  • biologically harmless
  • does not contain any synthetic binders
  • Highly permeable
  • high adhesion
  • ecologically harmless
  • Fungus and mold inhibiting
  • emissions minimized
  • Free from fogging-active substances
  • free from preservatives
  • Suitable for allergy sufferers
  • Highly permeable
  • solvent-free
  • Fungus and mold inhibiting
  • Very good coverage
Fire properties
  • Non-combustible class A1 according to EN 13501-1:2018
 - - - - -
Product family
  • Thermal insulation panel made of mineral material
 - - - - -
Area of application
  • Interior insulation of ceilings (underside) or the roof
  • Interior insulation of ceilings or floor slabs (top side) under screed without sound insulation requirements
  • Interior wall insulation
  • Mold remediation
 - - - - -
Authorization
  • ETA (European Technical Assessment Body of the German Institute for Building Technology DIBt )
 - - - - -
Thermal conductivity
  • Lambda value λ : 0.067 W/(mK)
  • λD(23.50) = 0.073 W/(m-K) * nominal value
 - - - - -
Compressive strength
  • 1000 kPa
 - - - - -
pH value
  • 10.3 (alkaline, strongly mold-inhibiting)
 - - - - -
Consumption
  • 1.34 Sheets 1000 x 750mm per m²
  • approx. 2.5 kg powder/m² with 8 mm toothing
  • approx. 1.3 to 1.5 kg/m²
  • approx. 7 L mixing water per 20 kg smoothing filler
  • depending on the condition of the substrate
  • approx. 7 m²/l
  • depending on the absorbency and structure of the substrate
  • approx. 100 - 250 ml/m² ready-to-use mixture
  • Consumption is highly dependent on the absorbency of the substrate
  • Brushes / rollers: approx. 200-500 g/m2 for one coat
Calcium silicate boards Strength
  • classic
 - - - - -
Pre-primed
  • Yes
 - - - - -
Panel class
  • Standard
 - - - - -
Panel format
  • 750x1000 mm
 - - - - -
Delivery form
  • Panels 1,000 x 610 x 100mm
  • Paper bags with PE liner, 25 kg each
  • Paper bags-a-20-kg
 -
  • Plastic bucket à 5 L
 -
Water vapor diffusion resistance
  • μ = 2 or 5 2
 - - - - -
Pore space
  • 90%
 - - - - -
Panel thickness
  • 100 mm
 - - - - -
Raw density
  • 230 kg/m3 to 265 kg/m3
 - - - - -
Special features
  • Fast installation, fewer joints, less filling work, fewer thermal bridges
  • Surface pre-primed at the factory
 - - - - -
Color -
  • Gray
  • White
  • Individual tinting possible
  • White
  • colorless
  • max. 10 % silicate solid and tinting paints
  • White
Consistency -
  • Powder
  • Powder
 - - -
Processing instructions -
  • The substrate must be stable, solid, dimensionally stable and free of dust, dirt, oil, grease and loose particles.
  • Mix the adhesive in a clean container by stirring it into tap water (approx. 3 minutes)
  • Allow adhesive to dry thoroughly before further processing
  • Pre-treat highly absorbent or freshly plastered substrates with silicate primer
  • The substrate must be stable, solid, dimensionally stable and free of dust, dirt, oil, grease and loose particles.
  • Pre-treat highly absorbent or freshly plastered substrates with silicate primer
 - - -
Mixing ratio -
  • 7.5 L mixing water per 25 kg bag of special adhesive
 - - - -
Processing temperature -
  • from + 5 °C
  • 5 °C - 30 °C
  • During application and drying, the temperature of the air, the paint and the substrate must not fall below + 5 °C
  • During application and drying, the temperature of the air, the paint and the substrate must not fall below + 5 °C
  • During application and drying, the temperature of the air, the paint and the substrate must not fall below + 5 °C
Processing time -
  • approx. 2 hours (depending on temperature and humidity)
 - - - -
Glue open time -
  • approx. 25 min.
  • Depending on the substrate, the open time may be shorter
 - - - -
Drying time -
  • approx. 24 hours (depending on temperature)
 -
  • approx. 12 hours at 20 °C and 50% relative humidity
 -
  • Can be painted over after approx. 12 h at 20 °C and 65% relative humidity
Adhesive bed thicknesses -
  • approx. 3 - 10 mm
 - - - -
Bulk density -
  • approx. 1.35 kg/dm³
 - - - -
Bulk density -
  • approx. 1.20 g/cm³
 - - - -
Composition -
  • processed fillers
  • high-quality additives
  • Cements
  • Additives for better processing and adhesion to the substrate
 -
  • Additives
  • Calcium carbonate
  • Potassium water glass / polymer dispersion
  • Silicates
  • Titanium dioxide
  • Water
  • Additives
  • Copolymer dispersion
  • Potassium silicate
  • Water
  • Additives
  • Copolymer dispersion
  • Potassium silicate
  • Special mineral filler combination
  • Titanium dioxide
  • Water
Storage -
  • firmly closed
  • frost-free
  • at least 9 months
  • dry
  • frost-free
  • At least 6 months in a sealed container
  • dry
  • approx. 12 months with closed container
  • frost-free
  • cool
  • dry
  • approx. 12 months with closed container
  • frost-free
  • cool
  • dry
  • approx. 12 months with closed container
  • frost-free
  • cool
  • dry
Occupational safety -
  • Fresh special adhesive is alkaline
  • Wear skin and eye protection
 -
  • Wear skin and eye protection
  • Carefully cover stone, glass, metal
  • Rinse paint splashes immediately with water
  • Wear skin and eye protection
  • Carefully cover the area around the surface to be coated
  • Wear skin and eye protection
  • Carefully cover stone, glass, metal
Brand -
  • Calcium silicate panel store
  • Calcium silicate panel store
  • Calcium silicate panel store
  • Calcium silicate panel store
  • Calcium silicate panel store
Mixing water requirement - -
  • approx. 7 L mixing water per 20 kg smoothing filler
 - - -
Maximum layer thickness - -
  • approx. 2 mm (not thicker even in the joints!)
 - - -
Water vapor diffusion resistance coefficient - -
  • μ H2O: < 25
 - - -
Base - -
  • Limestone powder
  • White hydrated lime
  • White cements
 - - -
Wet abrasion class - - -
  • Class 3
 - -
Processing - - -
  • roll
  • delete
  • inject
  • delete
  • roll
  • inject
  • delete
Dilution - - -
  • max. 5 to 10 % (with water)
  • Dilute undiluted or 1:5 to 1:10 depending on application
  • max. 5 to 10 % (with water)
Cleaning - - -
  • Immediately after use with water
  • Immediately after use with water
  • Immediately after use with water
Transport details - - -
  • No dangerous goods in the sense of ADR
  • No dangerous goods in the sense of ADR
 -
Characteristics according to DIN EN 13300 - - -
  • Gloss level: dull matt
  • Contrast ratio: Class 1 with a coverage of approx. 7 m²/l
  • Maximum grain size: fine
  • Wet abrasion resistance: Class 3
 - -
Density - - -
  • approx. 1.6 g/cm³
  • approx. 1.05 g/cm³
  • approx. 1.6 g/cm³
Application - - - - -
  • Suitability as a substrate for subsequent glaze or effect coatings
  • Inside
  • Roll, spray and brush structures
Waste disposal - - - - -
  • Dried out as household waste
  • liquid material residues are disposed of at the collection point for old paints
  • Only dispose of empty containers for recycling

Package contents

Calcium silicate board pre-primed (1,000x750x100mm) Special KP silicate adhesive | 25kg bag Smoothing / lime filler | 20kg bag Silicate paint PREMIUM white | 5L Silicate primer | 5L Brush-on and roller plaster | 7kg
Product features Calcium silicate board pre-primed (1,000x750x100mm) Special KP silicate adhesive | 25kg bag Smoothing / lime filler | 20kg bag Silicate paint PREMIUM white | 5L Silicate primer | 5L Brush-on and roller plaster | 7kg
Square meter
6,00 m²
Finish
with color (smooth)
 8 x 1 x 1 x 1 x 1 x -
Square meter
12,00 m²
Finish
with color (smooth)
 16 x 2 x 1 x 1 x 1 x -
Square meter
18,00 m²
Finish
with color (smooth)
 24 x 3 x 2 x 1 x 1 x -
Square meter
24,00 m²
Finish
with color (smooth)
 32 x 4 x 2 x 1 x 1 x -
Square meter
30,00 m²
Finish
with color (smooth)
 40 x 5 x 2 x 2 x 1 x -
Square meter
36,00 m²
Finish
with color (smooth)
 48 x 6 x 3 x 2 x 1 x -
Square meter
42,00 m²
Finish
with color (smooth)
 56 x 7 x 3 x 2 x 1 x -
Square meter
48,00 m²
Finish
with color (smooth)
 64 x 8 x 4 x 2 x 2 x -
Square meter
54,00 m²
Finish
with color (smooth)
 72 x 9 x 4 x 3 x 2 x -
Square meter
60,00 m²
Finish
with color (smooth)
 80 x 10 x 4 x 3 x 2 x -
Square meter
66,00 m²
Finish
with color (smooth)
 88 x 11 x 5 x 3 x 2 x -
Square meter
72,00 m²
Finish
with color (smooth)
 96 x 12 x 5 x 3 x 2 x -
Square meter
78,00 m²
Finish
with color (smooth)
 104 x 13 x 6 x 4 x 2 x -
Square meter
84,00 m²
Finish
with color (smooth)
 112 x 14 x 6 x 4 x 2 x -
Square meter
90,00 m²
Finish
with color (smooth)
 120 x 15 x 6 x 4 x 2 x -
Square meter
96,00 m²
Finish
with color (smooth)
 128 x 16 x 7 x 4 x 2 x -
Square meter
6,00 m²
Finish
Roll plaster (rough)
 8 x 1 x 1 x - 1 x 1 x
Square meter
12,00 m²
Finish
Roll plaster (rough)
 16 x 2 x 1 x - 1 x 1 x
Square meter
18,00 m²
Finish
Roll plaster (rough)
 24 x 3 x 2 x - 1 x 1 x
Square meter
24,00 m²
Finish
Roll plaster (rough)
 32 x 4 x 2 x - 1 x 2 x
Square meter
30,00 m²
Finish
Roll plaster (rough)
 40 x 5 x 2 x - 1 x 2 x
Square meter
36,00 m²
Finish
Roll plaster (rough)
 48 x 6 x 3 x - 1 x 2 x
Square meter
42,00 m²
Finish
Roll plaster (rough)
 56 x 7 x 3 x - 1 x 3 x
Square meter
48,00 m²
Finish
Roll plaster (rough)
 64 x 8 x 4 x - 2 x 3 x
Square meter
54,00 m²
Finish
Roll plaster (rough)
 72 x 9 x 4 x - 2 x 3 x
Square meter
60,00 m²
Finish
Roll plaster (rough)
 80 x 10 x 4 x - 2 x 3 x
Square meter
66,00 m²
Finish
Roll plaster (rough)
 88 x 11 x 5 x - 2 x 4 x
Square meter
72,00 m²
Finish
Roll plaster (rough)
 96 x 12 x 5 x - 2 x 4 x
Square meter
78,00 m²
Finish
Roll plaster (rough)
 104 x 13 x 6 x - 2 x 4 x
Square meter
84,00 m²
Finish
Roll plaster (rough)
 112 x 14 x 6 x - 2 x 5 x
Square meter
90,00 m²
Finish
Roll plaster (rough)
 120 x 15 x 6 x - 2 x 5 x
Square meter
96,00 m²
Finish
Roll plaster (rough)
 128 x 16 x 7 x - 2 x 5 x

Similar products