Moisture regulating
The pre-primed 50 mm calcium silicate board has a high capillary effect. This means that moisture can be transported quickly from the cold side of the wall to the warm side. There it evaporates into the room. If the 50 mm climate panel absorbs excess moisture from the room air, it is easily and quickly transported back to the warm panel surface. The moisture is temporarily stored and released again. Calcium silicate panels have a moisture-regulating effect.
Prevents mold
The extra-solid silicate boards are very mold-inhibiting by nature. The high pH value of the calcium silicate boards and the lack of a breeding ground remove the basis for mold. The formation of mold is effectively prevented. The panels prevent mold and provide security in problem areas and on cold wall surfaces.
Saves heating costs
Compared to a normal, uninsulated brick wall, you reduce energy consumption and therefore not only save on heating costs, but also increase comfort. The panel is a good insulating panel and the wall is significantly warmer - save heating costs and prevent mold with one product.
Protects against fire
Boards are classified in the highest class A1 according to the EU building material classification for the assessment of reaction to fire (EN 13 501). This means that the board is classified as a non-combustible material.
Screw-proof
Our premium calcium silicate panel is lightweight, but very stable and even screw-proof. You can therefore screw screws directly into the panel for fastening. We recommend the use of dowels (including pre-drilling) for higher loads on the calcium silicate panel of over 2 kg.
