Palette mit 42 weißen Säcken, darauf zwei offene Säcke Spezial KP-Silikatkleber

Weißer 25kg Sack Spezial KP-Silikatkleber mit grünem Etikett auf weißem Hintergrund

pallets Accessories pallets

Special KP silicate adhesive | full pallet

Artikelnummer: ZB08.SKPW.025.1050-00

Categories: Pallets, Accessories pallets

1.906,44 € inkl. 19% MwSt zzgl. Versandkosten(1,82 € / kg)

42 pcs. a' 25 kg bags

This article consists of:

Special KP silicate adhesive | 25kg bag 42 x

Über 10 Jahre Erfahrung

Professionelle Beratung durch langjährige Expertise

Blitzschnelle Lieferung oder Abholung

Schnell, versichert und zuverlässig

Hohe Qualität, trotzdem günstig

Faire Preise durch Spezialisierung. Qualität, die sich lohnt

Systemzubehör aus einer Hand

Auf einander abgestimmte Produkte, auf die Sie sich verlassen können

Privat & Gewerbe

Ob kleine oder große Menge – bei uns ist jeder willkommen

Buy now, pay 30 days later or in installments.

Die wichtigsten Fakten

Weight: 1050 kg

Gesetzliche Gewährleistung (EU) 2025/1960

Lieferzeit: 3 - 6 Arbeitstage

Processing instructions Request for quotation Product data sheet

Additional information

Weight	1050 kg

Product components


Feature	Special KP silicate adhesive \| 25kg bag
Item number	ZB08.SK01.025.0025-00
Weight	25 kg
Delivery form	Paper bags with PE liner, 25 kg each
Storage	firmly closed frost-free at least 9 months dry
Properties	0% VOC - no outgassing Also suitable for levelling / equalizing walls extremely economical open to vapor diffusion high adhesion High adhesive strength capillary active ecological optimized for calcium silicate Can also be applied to gypsum plaster in conjunction with special gypsum plaster primer
Occupational safety	Fresh special adhesive is alkaline Wear skin and eye protection
Applicable substrates	The substrate must be firm, clean, free of oil and grease, dry and stable. Mineral substrates e.g. sand-lime bricks, bricks, lime plaster, concrete etc. ... The plaster base must be firm, stable, frost-free and free of adhesion-reducing residues If necessary, prime or pre-wet highly absorbent substrates Can be applied to gypsum plaster
Processing time	approx. 2 hours (depending on temperature and humidity)
Bulk density	approx. 1.35 kg/dm³
Consistency	Powder
Color	Gray
Composition	processed fillers high-quality additives Cements Additives for better processing and adhesion to the substrate
Bulk density	approx. 1.20 g/cm³
Glue open time	approx. 25 min. Depending on the substrate, the open time may be shorter
Drying time	approx. 24 hours (depending on temperature)
Adhesive bed thicknesses	approx. 3 - 10 mm
Processing temperature	from + 5 °C
Processing instructions	The substrate must be stable, solid, dimensionally stable and free of dust, dirt, oil, grease and loose particles. Mix the adhesive in a clean container by stirring it into tap water (approx. 3 minutes) Allow adhesive to dry thoroughly before further processing Pre-treat highly absorbent or freshly plastered substrates with silicate primer
Mixing ratio	7.5 L mixing water per 25 kg bag of special adhesive
Consumption	approx. 2.5 kg powder/m² with 8 mm toothing
Brand	Calcium silicate panel store